Jensen MS2013BT, Operation Manual

Page: 11 / 44

MS2013BT
9
iPod OPERATION
This unit is equipped with an iPod ready function that will allow you to control your iPod (if
compatible) using the control panel buttons. The following iPod versions are supported:
•
iPod Nano 5G, iPod Nano 6G
• iPod 5G
• iPod Classic
• iPhone 4, iPhone 4S
• iPod Touch 3G, iPod Touch 4G
NOTE: Earlier model iPods may not be supported because they do not implement the
USB control protocol. Also, the iPod Shuffle is not supported because it does not utilize
the 30-pin Apple iPod Connector. These unsupported iPod models may be connected to
the radio using one of the Auxiliary Inputs.
Accessing iPod Mode
Connect a supported iPod or iPhone to the USB connector. The iPod icon illuminates in the
bottom right corner of the LCD whenever an iPod or iPhone is attached to the USB connector.
Music playback begins automatically.
To enter iPod mode from any other source, press the MODE button (4) until “USB” appears on
the display . If the user connects an iPod containing no songs, the radio will display a
message stating “No Songs” when it enters iPod mode.
Turning the iPod On/Off
The iPod power turns on automatically when an iPod is connected to the USB connector, as
long as the vehicle ignition is turned on. You can turn the iPod off by disconnecting it or by
turning the ignition off. When the ignition is turned off, the iPod will pause and then enter sleep
mode after 2 minutes. While the iPod is connected, the power cannot be turned on or off from
the iPod itself.
NOTE: The iPod will continuously recharge when connected to the unit, as long as the
vehicle ignition is turned on.
Controlling Playback
Selecting Tracks
During playback, press the SEEK/TUNE/TRK >>| button (14) to play the next track in the
current category. Press the SEEK/TUNE/TRK |<< button (13) twice to play the previous track.
Press and hold the SEEK/TUNE/TRK |<< / >>| button (13/14) to fast reverse/forward the song.
Pausing Playback
During playback, press the 1/>|| button (5) to pause the iPod player. “PAUSE” will appear on
the LCD. Press 1/>|| again to resume playback.
Repeat Play
During playback, press the 2 RPT button (6) to repeat the current song. “REPEA” will appear
on the LCD. Press 2 RPT again to stop repeat playback.
Random Play
During playback, press the 4 RDM button (8) to play all songs in the current category in
random order. Random play will begin once the current song has finished playing. “SHUFF” will
appear on the LCD. Press
4 RDM again to stop random playback.
NOTE: If you press and hold the SEEK/TUNE/TRK |<< / >>| button to change the current
song to the previous/next song, you will exit fast reverse/forward mode.
Alternate Display Information
Press the DISP button (12) to change the display information in the following order: ARTIST >
TITLE > FOLDER > FILE NAME > ARTIST.
Search Mode
Press the BAND/SEARCH button (16) to enter iPod search mode and choose from the
following search criteria: Playlist, Artist, Album, Song, Genre or Composer (consecutively).
When search mode is selected, press the
ENTER button (18) to confirm selection. Use the
VOL +/- buttons (2) to navigate through various list selections. Press ENTER (18) to make your
final selection.
3
2a
4 7
11
6
12
8 5 15 9
16
10
17
1
13 18
14
2b
MS2013BT
19 20