8
MPR2121
Dimmer
Quick Preset Color
Setting the Color Mode
Auto Color
Preset Color
Custom Color
Flash Color
Press
DIM
to adjust the dimmer level for the buttons and
LCD, and turn the
volume knob
left or right to select
HIGH (default)/MID/LOW.
Press the
volume knob
while the dimmer level is being
displayed to select one of 7 preset colors.
Press and hold the
volume knob
for more than two
seconds to enter the color setting menu. Turn the
volume knob
left and right to select Color Auto (default)/
Preset/Custom/Flash mode. Press and hold the
volume
knob
for more than 2 seconds again to enter each color
mode.
Set the unit to rotate between all illumination colors
automatically.
Select one of the 7 colors (Blue/Green/Red/Yellow/Violet/
Cyan/White).
Adjust each red, green and blue in the range of 0-32 to
customize your colors for over 32K combination.
Note
: Adjusting each red, green and blue level to 0 will
turn off all the lights on the LCD and buttons. To turn the
lights back, press
DIM
and change the color again in the
color setting.
Select one out of six different color and flash effect
lights or turn it off. Flash lights will be demonstrated
for about 30 seconds, and back to setting mode. The
adjusted color will be flashed when there is an incoming
Bluetooth call.
RGB Color Operation
