E-6
tape ends during play or fast forwarding, the PLAY
BUTTON (#14) will automatically
release to stop the cassette from running.
CASSETTE TAPE OPERATING TIPS
1. High quality tapes are recommended to obtain maximum quality reproduction from
recordings.
2. Tapes with playing time of 120 minutes (C-120) are not recommended because they
contain thinner and longer tape that has a greater chance to malfunction and jam,
which may damage the cassette mechanism.
3. To obtain good reproduction, the head should be cleaned after every 10 to 20 hours of
use. It is also recommended that the cassette be kept away from excessive heat or
cold.
4. If there is slack in the tape, remove the slack prior
to inserting the cassette. To remove the slack,
insert a pencil into the hub and rotate clockwise as
shown:
5. A leader tape is provided at the beginning on each cassette. There is no recording on
this area, so it is necessary to let the tape run for about five seconds to clear the head.
6. Keep the tape head clean since a dirty head
can cause distorted sound or improper tape
speed. Depress the PLAY
BUTTON (#14)
and use a small cotton swab with tape head
cleaner or alcohol to clean the tape head,
capstan and pinch roller as shown:
BLUETOOTH OUT OPERATION
The product supports Bluetooth wireless connection. It can be connected with external
Bluetooth compatible headphones (not included) and Bluetooth speakers (not included).
1. Switch the BLUETOOTH ON/OFF SWITCH (#4) to
“ON” at the back of the cassette
player to enter the Bluetooth transmit mode.
2. When the cassette player is in Bluetooth transmit mode, the blue Bluetooth indicator
near the BLUETOOTH ON/OFF SWITCH (#4) will flash. The pairing process could
take up to 30 seconds. For best results, stay within 3 ft. of the Bluetooth speaker you
are pairing to.
3. When the Bluetooth connection is made, the blue Bluetooth indicator will stop flashing
and remain lit.
