Jensen MCD5090, Installation And Operation Manual

Page: 6 / 10

MCD5090
6
TUNER OPERATION
Select a Band
Press the BAND button (21) on the control panel to change between three FM bands and two
AM bands. Each band stores up to six preset stations.
Tuning
Manual Tuning
Press the up >>| (19) or down |<< button (18) for less than one second to change the radio
frequency number up or down one step.
Auto Seek Tuning
Press the up >>| (19) or down |<< button (18) for more than three seconds to move to the next
station automatically.
Preset Stations
Six numbered preset buttons store and recall stations for each band.
Store a Station
Select a band (if needed), then select a station. Press and hold a preset button (9-14) for three
seconds. The preset number will appear in the display.
Recall a Station
Select a band (if needed). Press a preset button (9-14) to select the corresponding stored
station.
Automatically Store / Preset Scan
Automatically Store
Select a band (if needed). Press the A/PS button (16) for more than three seconds to
automatically select six strong stations and store them in the current band. The new stations
replace any stations already stored in that band.
Preset Scan
Select a band (if needed). Press the A/PS button (16) to scan stations stored in the current
band. The unit will pause for eight seconds at each preset station. Press A/PS again to stop
scanning when the desired station is reached.
Stereo
The unit will automatically pick up a stereo signal, when available. When in stereo mode, the
“
” icon appears in the display. When no stereo signal is available, the unit will automatically
revert to mono operation, and no icon will be displayed.
Local/Distant (LOC)
Press the LOC button (6) to choose between Local (LOC) or Distance (DX) mode. This feature
is used to designate the strength of the signals at which the radio will stop during automatic
tuning. “Distance” is the default setting, allowing the radio to stop at a broader range of signals.
To set the unit to select only strong local stations during automatic tuning, press the
LOC
button until “LOC” appears in the display.
USA/EURO Tuning
Use the BAND button (21) switch between USA and European broadcast tuning.
1. Turn the vessel ACC on and the radio off.
2. Press and hold the BAND button for 5 seconds.
The LCD will display either “USA” or “EUR” as the new tuning region.
1 4
6
8 2 3 5
10
16
9 11 12 13 14 21
15
20
19
18
7
17
MCD5090
DIGITAL AUDIO
COMP COMP ACT ACT
MODE
MUTE
BAND
A/PS
EQ/LD
LOC
6 5 4 3 2 1
INT RPT RDM -10
+10
AUX IN AUX IN
PUSH
SEL
marine