JWM40
6
Setting the Bluetooth
Bluetooth (On/Off): Choose “Bluetooth On” or “Bluetooth Off”.
Bluetooth Device (Locked/Unlocked, Disconnect/Connect, Delete): view, lock
and delete from a list of previously paired mobile device models.
Bluetooth Pair: Press “
ENTER
” knob to automatically pair a device.
PRESET Volume (PVOL): Select an automatic turn on volume
Reset
Press
ENTER
knob button to reset the JWM40 to factory default.
Auxiliary Input Function
Press the
AUX
button (14) to directly access auxiliary input modes (AUX IN1 and
AUX IN2) from any other mode when a portable audio device is connected to the unit.
To connect a portable audio device, insert a standard 3.5mm (audio line output or
headphone output from your portable CD / MP3 / iPod or other media player) into the
AUX A/V IN connector (AUX IN1) (36) on the front of the unit or the AUDIO IN (AUX
IN2) on the back of the unit (see “Wiring” on page 4).
Auxiliary Input Connector
For front panel A/V input, an external audio/video (A/V) source such as a video game
player, camera, etc. can be connected to the front panel A/V input with the provided
3.5mm A/V cable adapter (Please note that there are several different A/V cable
"standards"). Connect the device to the AUX A/V IN connector (36) on the front panel.
In addition to front panel auxiliary input source, the unit can also be connected to the
RCA audio input through the AUX AUDIO INPUT jack on the rear of the unit.
Press the
AUX
button (14) to directly access auxiliary input modes (AUX 1 IN and
AUX 2 IN) from any other mode when a portable audio device is connected to the
unit.
USB Interface Connector
You can connect a USB device directly to USB interface (19) on the front of the
JWM40 for playback of compatible files. Playback begins automatically. Press the
USB button (12) to switch to USB mode from another source. Refer to “MP3/USB
Operation” on page 12 for additional operating instructions.
NOTE: USB will not support Apple device playback. The USB input supplies up
to 1A of charging current.
Clock Display
Press the
VIEW
button (25) to alternate between playing time and clock time while in
Tuner, CD, DVD, USB or auxiliary input mode.
Clock Setup
Press and hold
the clock
HOUR
or
MINUTE
button (28, 30) to access clock setup
mode. The number representing the hours and minutes will flash. Press the
HOUR
button (28) to adjust the hour and press the
MINUTE
button (30) to adjust minutes.
The new time will be saved five seconds after the last adjustment is made.
Sleep Mode
The Sleep Timer will automatically turn off the JWM40 in the designated number of
minutes. To set the Sleep Time, press the
SLEEP
button (26) and the sleep time will
appear in the display with the number representing the minutes (SLEEP 0). Press
SLEEP
button repeatedly to change the sleep time from 0 (OFF), 15, 30, 45 or 60
minutes.
Alarm Setting
To set the alarm,
press and hold
the
ALARM
button (24) for 2 seconds and the clock
digits will be flashing. Press the
HOUR
button to adjust the hour once at a time or
press and hold
to advance rapidly. Repeatedly press the
MINUTE
button to adjust the
minute one digit at a time, or
press and hold
to advance rapidly.
Press the
ALARM SET
or
ENTER
knob button to save the alarm time.
Once a time is set, press
ALARM
(24) to turn the alarm function on or off.
Remote Sensor
Infrared receiver (18) is located on the upper left of front panel to receive infrared
signal emitted by the remote control.
Speaker Output
The two speaker output buttons (15, 17) (Zone A, Zone B) control speaker zones
output from the radio. Press any of the two buttons to turn the corresponding speaker
zone on or off. SPK A (Zone A), SPK B (Zone B) will appear on the display.
