background image

 

JWM1A 

 

INTRODUCTION 

Thank You! 

Thank you for choosing a Jensen product. We hope you will find the instructions in this owner’s 

manual clear and easy to follow. If you take a few minutes to look through it, you’ll learn how to use 

all the features of your new Jensen receiver for maximum enjoyment. 

Features 

Features of Jensen JWM1A mobile audio system include: 

 

Backlit Controls and Display   

 

Electronic AM/FM Tuner 

 

Bluetooth Ready with A2DP / AVRCP streaming Audio 

 

APP Ready   

 

Time/Alarm Clock 

 

Front Aux Audio Input 

 

4 Speaker Output (2 zones) 

Precautions 

 

Use the Proper Power Supply. 

This product is designed to operate with a 12 volt DC, negative ground battery system (the 

standard system in a North American vehicle). 

 

Use Authorized Service Centers. 

Do not attempt to disassemble or adjust this precision product; contact a professional for 

assistance. 

 

Avoid Moisture. 

To reduce the risk of fire or electric shock, do not expose this equipment to rain or moisture. 

 

Avoid Cleaning Products. 

The front of this unit should only be cleaned with a slightly damp cloth. Do not use cleansers. 

 

Use Recommended Accessories. 

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK AND ANNOYING 

INTERFERENCE, USE ONLY THE RECOMMENDED ACCESSORIES. 

 

 

 

 

 

 

 

 

Packing List 

 

 

 

 

 

 

 

Summary of Contents for JWM1A











Reviews: