9
during playback for fast forward searching within the song.
5.)
Press the
Button to go to the starting point of current song or previous
song. Press and hold the button during playback for fast backward search
within the song.
6.)
Press the
/ ALARM 1
or
VOLUME - / ALARM 2
buttons to adjust
the volume output level.
7.)
Playback will be suspended if there is an incoming call. The iPhone will ring.
8.)
Touch the Answer icon once to pick up the call.
9.)
Touch the Speaker Button on the iPhone once to answer the call in handsfree
mode.
10.)
Press the End Call Icon when you have finished answering the call. Music will
resume.
11.)
Press and hold the
Button until your iPhone/iPod turns off.
12.)
Press and hold the POWER/FUNCTION Button to turn JiMS-70i off.
Note:
Adjust the built-in preset EQ of your Apple device to fine tuning the sound
quality to suit your needs.
The volume control slider on your iPhone or iPod touch are disabled when
docked.
Your Apple device will charge as long as it remains docked.
ALARM OPERATIONS
Your JiMS-70i provides two different wakeup times, ALARM1 and ALARM2. You
can choose to use them independently or simultaneously: ALARM 1, ALARM 2 or
both ALARM 1 and ALARM 2.
SETTING THE ALARM(S)
Note:
Alarm time (s) can only be set in Power Off mode.
1.) To set the wakeup time for ALARM 1 or ALARM 2, press and hold the
VOLUME
+
/ ALARM 1
or
VOLUME - / ALARM 2
buttons for approximately 2 seconds
until the hour digit blinks. The Alarm 1 or Alarm 2 Indicator will light depending
which Alarm is chosen.
2.) When the hour digit blinks, press the
or
buttons to adjust your desired
hour digit.
Note
: For the 12 Hour format, Make sure the Hour is set so that AM or PM is
correctly displayed. There is a
PM
Indicator
located in the right bottom corner of
the Display. When it lights the displayed time is
PM
and vice versa.
3.) Press the
/ ALARM 1
or
VOLUME - / ALARM 2
buttons to save
the hour setting, the minute digits will blink.
4.) When the minute digits blink, press the
or
buttons to adjust your
desired minute digit.
5.) Press the
/ ALARM 1
or
VOLUME - / ALARM 2
buttons to save
the wakeup setting.
SETTING THE WAKEUP MODE
6.)
Following step 5 above, press the
/ ALARM 1
or
VOLUME - / ALARM 2
buttons once to enter the wake up selection mode.
