Jensen JHD3000 Owner'S Manual Download Page 6

 - 9 -

  - 10 -

               

    

SETTING THE CLOCK

1.Switch the vehicle ignition "on" and press radio power switch off. The 
radio will display the time of day.
2.Press and hold the T/F button until the time (hour) display begins to flash.
3.With the hour display flashing, release the T/F button and then press the 
   TUNE - button to decrement the hours indication, or the TUNE + button to 
   increment the hour indication.
4.Press and release the T/F button again so the minutes display begins to 
   flash. Adjust the minutes display in the same manner described for the hours
   indication in step 3.
5.Five seconds after the last hour or minute adjustment is made, the time will
   be set into the unit and the time indication remains steady. To return to the
   frequency display ,press radio power switch on. The last preset radio fre-
   quency appears on display. Five seconds later, the display will return to 
   the time indication.

                           

 

CARE AND MAINTENANCE 

The radio section of your new sound system does not require any maintenance
We recommend that you keep this maunal for reference on the many features 
found in this unit as well as how to set the clock.
The compact disc player section also requires no routine maintenance, but pro-
per understanding of its use and handing will help you obtain maximum enjoy-
ment of its capabilities. The following points should be observed.

 When cleaning the interior of the vehicle, do not get water or cleaning 

     fluids on the unit.

 The CD player is a precision instrument and will not operate properly in ex-

     treme heat or cold. In case of such conditions, wait until the interior 
     temperature of the vehicle reaches a normal temperature before use.   

 If the temperature inside the player gets too hot, a protective circuit will 

     automatically stop play of the disc. In this case, allow the unit to cool 
     off before operating the player again.

 Never insert anything other than a 5

(12cm) compact disc into the player 

    as the mechanism can be damaged by foreign objects.

 Do not attempt to use 3

(8cm) CD-Single discs in this unit, either with or 

     without an adaptor, as damage to the player and/or disc may occur. Such 
     damage will not be covered by the Warranty on this product.

 When not using the disc player , always remove the compact disc. Do not 

     leave an ejected disc sitting in the disc slot as this can expose it to 
     sunlight and other causes of damage.

● 

Do not attempt to open the unit chassis. There are no user serviceable parts 

    or adjustments inside. 

 When the vehicle warms up during cold weather or under damp conditions,

     moisture may condense on the lens of the disc player. Should this occur,
     the player will not operate properly until the moisture has evaporated.

 The unit is designed with a vibration dampening CD mechanism to minimize 

     interruption of disc play due to normal vibration in a moving vehicle.When 
     driving on very rough roads, however, occasional sound skips may occur.
     This will not scratch or damage the disc and normal play will resume 
     when the rough conditions cease.

                          

HANDLING COMPACT DISCS

Dirt, dust. scratches, and warpage can cause skips in the playback and 
deterioration of sound quality. Please follow these guidelines to take 
care of your compact discs;

 Use only compact discs with the mark

 Fingerprints, dust, and dirt should be carefully wiped off the disc's playing 

    surface(shiny side) with a soft cloth. Wipe in a straight motion from the 
    inside to the outside of the disc.

 Never use chemicals such as record sprays, household cleaners or thinner 

    to clean compact discs. Such chemicals can irreparably damage the disc's
    surface.

 Discs should be kept in their storage cases when not in use.

 Do not expose discs to direct sunlight, high temperatures or high humidity

     for extended periods.

 Do not stick paper, tape, or labels on the disc surfaces nor write on them 

     with any type of marker.

SETTING THE CLOCK

 

HANDLING COMPACT DISCS

COMPACT

DIGITAL AUDIO

Summary of Contents for JHD3000










Reviews: