Jensen JENMP6512I - USB/SD CARD RECEIVR, Installation And Operation Manual

Page: 26 / 30

MP6512i
22
TROUBLESHOOTING
Problem Cause Corrective Action
Does not operate
(display does not
light)
No power to yellow
wire; no power to red
wire
Check connection with test
light; check vehicle fuse with
test light
Inline fuse blown Replace fuse
No power to unit Inline fuse blown Check/replace fuse
No speakers oper-
ate (display lights
normally)
No speaker harness,
speakers not con-
nected
Connect speaker harness;
check speaker wires
Not all speakers
operate
Incorrect splices or
connections
Check all splices and connec-
tions
Speaker wires shorting
to chassis ground or to
each other
Check splices; insulate all
bare wires
Blows fuses Power wire shorting to
ground
Make sure wire is not pinched
Speaker wires shorting
to ground
Make sure wire is not pinched
Incorrect fuse; fuse too
small
Install fuse of correct rating