background image

 

E-8

You can play other music sources (iPod, MP3 or other digital audio players) through the

speakers of the JCR-295 by connecting the AUX IN Jack (#17) to your external player’s

audio out jack or headphone jack.
1.

Plug one end of an audio cable (not included) into the AUX IN Jack (#17) and the other
end of the cable to the headphone jack of your digital audio player.

2.

Press the POWER/FUNCTION Button (#5) repeatedly to select the AUX mode, LED
Display (#9) show AU.

3.

Start playing the device you plugged into the AUX IN Jack (#17).

4.

Slowly adjust both the volume controls of the JCR-295 and the external device until
you reach a comfortable listening level.

5.

Turn off your iPod, MP3 player etc. when finish listening.

6.

Press and hold the POWER/FUNCTION Button (#5) 5 seconds to turn the JCR-295
off and unplug the AUX IN Jack.

Note : 

If you connect the JCR-295 to the Line-Out Jack of your external device, you only
need to adjust the VOLUME CONTROL of your JCR-295. If you connect to the
Headphone Jack of your external device, you may need to adjust both the volume
controls of your external device and the JCR-295 to obtain the desirable listening
level.

Remember to turn off the JCR-295 when you have finished listening. Don't forget to
switch off the power of your external audio device as well.

Cell Phones and Smaller tablets can be placed in the Cell Phone Holder when it is 
attached to the top of the JCR-295. Smaller tablets can be placed in vertical or horizontal
mode as shown below.

NOTE

: We do not recommend placing larger screen tablets in the Cell Phone Holder. 

Larger tablets may cause the JCR-295 to be unstable and it may fall over and cause 
damage to the tablet. 

 

AUX OPERATION 

 

USING THE CELL PHONE HOLDER   

OR

OR

Summary of Contents for JCR-295W












Reviews: