E
‐
10
following day.
4. If you do not want the beeping alarm to turn on the following day, tap the
corresponding alarm button or repeatedly until associated alarm indicator
or
goes off from display.
SNOOZE
After the radio or alarm sounds, you may press the SNOOZE button for a few
more minutes sleep. The alarm will stop for approximately 9 minutes and then
turn on again.
The snooze can be repeated again within 50 minutes.
SLEEP OPERATION
The sleep timer allows you to turn the unit off after a designated time is reached.
1. To activate the sleep timer, turn the unit on and tap the MODE button to
select AM, FM radio or listening to music via AUX IN.
2. Tap
the
SLEEP
button and the sleep time appears on the display.
3. Repeatedly tap the
button to select a sleep time. The unit will turn off after
90, 80, 70, 60, 50, 40, 30, 20 or 10 minutes. Wait for 3 seconds after your
selection for the unit to confirm the selection, the unit will play for the selected
length of time then automatically turn off.
4. To cancel the sleep timer, press the
button until timer shows “OFF”, the
unit will turn into standby mode immediately.
5. To turn the unit off before the selected length of time, press the button at
any time.
Notes:
To check the remaining sleep time, tap the
button once.
If you are falling asleep to music from an external device connected to the
AUX input, the sleep timer will shut off the power to this unit but it will not turn
off the external device.
AUX IN OPERATION
This unit provides an auxiliary audio signal input jack for connecting external
audio devices like MP3 players, CD players and iPods (except iPod shuffle 3rd
gen) and listen to your external source through the speakers of this system.
1. Use an audio cable (not included) with one 3.5 mm stereo plug on each end
of the cable.
2. Plug one end into the AUX IN jack located on the back of the unit and the
other end of the cable into the Line-out Jack or Headphone Jack of your
external audio device.
3. Turn on the external audio device.
4. Tap the MODE button to select AUX mode, “AUX” will show on display for
