background image

JCD2006

6

BASIC OPERATION

Control Panel Release (

)

Press the release 

 button (8) to release the control panel. (See “Detachable Control 

Panel (DCP)” on page 4.)

Power On/Off ( )

Press the   button (1) to turn the unit ON or OFF. 

Volume Control

To increase the volume, rotate the volume control knob (12) clockwise.

To decrease the volume, rotate the volume control knob counter clockwise. 

Mute

Press the MUTE button (11) to mute the audio output. Press MUTE again to restore the audio 
output to the previous level.

Mode

Press the MODE button (6) to select a different mode of operation, as indicated on the display 
panel. Available modes include Radio, CDP, and AUX In (optional Auxiliary Input).

Auxiliary Input 

With an separately purchased 3.5mm Audio In cable, you can connect your portable CD 
player, game player, camera, iPod, etc. to this unit.

1.

Connect the external signal to the “Aux In” jack (19) located on the front of the control 
panel.

2.

Press the MODE

 button to select Aux In mode.

3.

Press MODE again to cancel  

Display (DISP)

Press the DISP button (10) to view the clock. The LCD will display the clock for 5 seconds and 
then return to the previous display mode.

Clock Adjustment

With the clock displayed, press the DISP button (10) until the LCD flashes. Press the TUNE up 
>>| (7) button to adjust the minutes or the down TUNE |<< button to adjust the hour.

Reset

After releasing the control panel, use a pencil or any non-metallic 
object to press and hold the RESET button for five seconds to 
reset the main unit. The unit will return to the factory default 
settings. The reset button should be activated for the following 
reasons:

initial installation of the unit when all wiring is completed

function buttons do not operate

error symbol on the display

NOTE: If after pressing the RESET button the unit still does not function normally, use a 
cotton swab soaked in isopropyl alcohol to clean the socket on the back of the control 
panel.

Audio Menu

Press the volume control button (5) to access the Audio Menu. You can navigate through the 
Audio Menu items by pressing the volume control button repeatedly. Once the desired menu 
item appears on the display, adjust that option by turning the volume control knob within 5 
seconds. The unit will automatically exit the Audio Menu after five seconds of inactivity. The 
following menu items can be adjusted.

Volume Level

Use the volume control knob to adjust the Volume level from “00” (lowest) to “46” (highest).

Bass Level

Use the volume control knob to adjust the Bass level range from “-7” to “+7”.

Treble Level 

Use the volume control knob to adjust the Treble level range from “-7” to “+7”. 

Balance

Use the volume control knob to adjust the Balance between the right and left speakers from 
“R15” (full right) to “L15” (full left). “C00” represents an equal balance between the right and left 
speakers.

Fader

Use the volume control knob to adjust the Fader between the front and rear speakers from 
“R15” (full rear) to “F15” (full front). “C00” represents an equal balance between the front and 
rear speakers.

CD PLAYER / RECEIVER

JCD2006

40

WATTS X 4

AS PS

RDM

CH

CD-I

N

RPT

INT

13

14

15

16

17

18

19

RESET BUTTON

3.5mm Audio In Cable (not included)

Right Audio

Left Audio

Ground

1

2

3

For

 

Summary of Contents for JCD2006











Reviews: