Using your Bluetooth Cell Phone with the JC100
Operation
1. The JC100 with microphone, coupled with the car
speakers, works like a Bluetooth headset for your cell
phone.
2. When you dial out from the cell phone, the JC100 will
pause iPod music automatically and switch to phone use.
You can put down the phone and talk normally with the
other party. Your voice enters the JC100’s Microphone
and other party’s voice is heard through your car
speakers (via FM transmission from the JC100 to your
car stereo). When finished, press the JC100
button to disconnect the call, hang up from your cell
phone, or just wait for the other party to end the call. If
iPod music was playing, it will resume automatically
when the call is ended.
3.
If your cell phone is set up to auto-
answer, the JC100 will connect the call after 2 to 3 rings.
4. To make your call private, press the
button and
listen to the phone call using the earphone. When is
privacy mode, LCD will appear blue and will flash on and
off briefly every 3 seconds. Please note that the privacy
function is disabled after each call. You must press the
button again to make future calls private.
5. If you do not want to use the JC100 for a phone call,
the power button for 1 second to turn
theJC100 off.
Phone
Privacy
Privacy
press and hold
If a phone call comes in while your phone is connected
via Bluetooth, press the
button to answer the call
and mute iPod music.
6. If you are listening to FM radio, you must change your
radio station to the matched FM frequency to be able to
answer the call through the JC100.
Phone
NOTE: If an echo is heard in the Bluetooth audio, reduce the
car stereo volume. Some echo is normal due to limitations of
echo cancellation in the automobile environment.
9
Summary of Contents for JC100
Page 1: ...JC100 Owner s Manual...
Page 2: ......
