E-10
NOTE ON NON-MAGNETICALLY SHIELDED SPEAKERS
This unit is not magnetically shield and may cause color distortion on the screen of some
TVs or video monitors. To avoid this, you may need to move the unit further away from the
TV or monitor if unnatural color shifts or image distortion occurs.
Standby Mode is when the unit is first plugged into an AC power source, display shows
12:00AM and flashing or after all the settings have been made and the time is showing on
the display.
Standby mode is also enabled when the
POWER/ STANDBY
Button
is pressed and all
the functions (CD/ USB/ Bluetooth/ FM/ AUX) are off, no buttons are pressed and no
alarms are sounding.
1.
In Off (standby) mode, tap the
POWER/STANDBY Button
on main unit or remote
control to turn the unit ON. The unit will turn on, the last selected input mode icon will
show on LCD display, power indicator (red volume ring) will light.
2.
To turn the unit OFF (standby), tap the
POWER/STANDBY Button
on the main unit
or remote control again. The power indicator (red volume ring) will be off and LCD
display will change to show the current time.
After plugging in the AC power,
“12:00” will be flashing on the LCD display.
1.
In power off (standby) mode, press and hold the
CLOCK Button
on remote control or
main unit, the 12 HOUR format “SET 12H” will show in display and “12H” will be
flashing to prompt for input.
2.
Tap the
or
Button
on remote control or main unit to select 24 Hour format if
necessary. Otherwise, press the
CLOCK Button
to confirm 12 Hour clock format and
enter clock setup mode, Hour digits will be flashing.
3.
Tap
the
or
Button
on remote control or main unit to adjust the hour. Press and
hold the button for fast advance/ reverse setting.
Note:
Make sure the hour is set so that the AM/PM indicator is displayed correctly.
4.
Press the
CLOCK Button
on remote control or main unit to confirm the hour setting,
the minute digits will flash to prompt for input.
5.
Tap
the
or
Button
on remote control or main unit to adjust the minute. Press
and hold the button for fast advance/ reverse setting.
6.
Press the
CLOCK Button
again to complete the setting.
The unit will show the current time in standby mode. To check the current time in Power on
mode, press
CLOCK Button
on remote control or main unit, the current will show for 3
seconds and then return to the previous screen.
STANDBY MODE
TURNING THE UNIT ON/OFF
SETTING THE CLOCK
CHECKING THE CLOCK
