Jensen JBR550 Installation And Operation Manual Download Page 4

JBR550

2

SAFETY INFORMATION

When Driving

Keep the volume level Iow enough to be aware of the road and traffic conditions.

When Washing your Vehicle

Do not expose the product to water or excessive moisture. Moisture can cause electrical 
shorts, fire or other damage.

When Parked

Parking in direct sunlight can produce very high temperatures inside your vehicle. Give the 
interior a chance to cool down before starting playback.

Use the Proper Power Supply

This product is designed to operate with a 12 volt DC negative ground battery system.

Protect the Disc Mechanism

Avoid inserting any foreign objects into the disc slot. Misuse may cause malfunction or 
permanent damage due to the precise mechanism of this unit.

CAUTION:

THIS MOBILE CD PLAYER IS A CLASS I LASER PRODUCT. THIS UNIT USES A VISIBLE/
INVISIBLE LASER BEAM WHICH COULD CAUSE HAZARDOUS RADIATION IF EXPOSED 
DIRECTLY. BE SURE TO OPERATE THE MOBILE CD PLAYER AS INSTRUCTED. 

USE OF CONTROLS OR ADJUSTMENTS, OR PERFORMANCE OR PROCEDURES 
OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION 
EXPOSURE.

DO NOT OPEN COVERS AND DO NOT REPAIR BY YOURSELF. PLEASE REFER 
SERVICING TO A QUALIFIED TECHNICIAN.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS 
EQUIPMENT TO RAIN OR MOISTURE.

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK AND ANNOYING   
INTERFERENCE, USE ONLY THE RECOMMENDED ACCESSORIES. 

DISC NOTES

Depending on the recording status, conditions of the disc, and the equipment used for 
recording, some CD-Rs/CD-RWs may not play on this unit. For more reliable playback, please 
adhere to the following recommendations:

Use CD-RWs with speed 1x to 4x and write with speed 1x to 2x.

Use CD-Rs with speed 1x to 8x and write with speed 1x to 2x.

Do not play a CD-RW which has been written more than 5 times.

NOTE: CD-R and CD-RW discs will not play unless the recording session is closed and 
the CD is finalized.

Disc Maintenance

A dirty or defective disc may cause sound dropouts while playing. Before playing, wipe 
the disc using a clean cloth, working from the center hole towards the outside edge. 
Never use benzene, thinners, cleaning fluids, anti-static liquids or any other solvent.

Be sure to use only round CDs for this unit and do not use any special shape CDs. Use of 
special shape CDs may cause the unit to malfunction.

Do not stick paper or tape on the disc. Do not use CDs with labels or stickers attached or 
that have sticky residue from removed stickers.

Do not expose discs to direct sunlight or heat sources.

NOTE: A disc may become scratched (although not enough to make it unusable) 
depending on how you handle it and other conditions in the usage environment. These 
scratches are not an indication of a problem with the player.

Insert label

Do not bend.

Never touch
the under side
of the disc.

Wipe clean from 
the center to the
edge.

side up.

Summary of Contents for JBR550















Reviews: