E-6
CD OPERATION
1.
Slide the (RADIO OFF) CD/FM SELECTOR (#16) to CD position.
2.
Open the CD Door (#10). Carefully place an audio CD with its label side upward in
the CD compartment and close the CD Door (#10).
3.
Press the PLAY/PAUSE
BUTTON
(#5). The player will start reading TOC of the disc.
4.
The total number of tracks on the CD will appear in the LCD Display (#1) after a few
seconds and start playing from the first track.
5.
Adjust the Volume Control (#14) to obtain the desired sound level from the Built-in
Speakers.
6.
To suspend playing, press the PLAY/PAUSE
BUTTON
(#5) again. To resume playing,
press the PLAY/PAUSE
BUTTON
(#5) again.
7.
You can choose to play your favorite track directly by pressing either the
or
BUTTONS
(#9). The LCD Display (#1) will indicate the correct track number selected.
8.
To locate a particular passage within a track, keep the
or
BUTTONS
(#9)
depressed until it is found.
NOTE:
Low level audio will be heard during the search process to assist in locating correct
point in the track.
9.
To repeat a particular track, press the MODE
BUTTON
(#3) once or until the REPEAT
1 INDICATOR lights on the LCD display (#1).
10.
To repeat the entire CD, press the MODE
BUTTON
(#3) twice or until the REPEAT
ALL INDICATOR lights on the LCD display (#1).
11.
To stop playing, press the STOP
BUTTON
(#4).
12. At Stop mode, press MODE Button (#3) three times. The INTRO INDICATOR lights
on the LCD display. Press PLAY/PAUSE BUTTON (#5) to play the first 10 seconds of
each song in the disc.
13. At Stop mode, press MODE BUTTON (#3) four times. The SHUFF INDICATOR lights
on the LCD display. Press PLAY/PAUSE BUTTON (#5) to play songs randomly.
14. When you wish to turn off the CD PLAYER, press the STOP BUTTON (#4) again at
Stop mode..
CD PROGRAMMED OPERATION
This function allows the tracks to be played in a programmed sequence. Programs can be
set in either the STOP or NORMAL PLAY mode.
1. Press the PROG. BUTTON (#6) once. The PROG. INDICATOR will flash and
Program Channel Number "01" will appear and the track number “00” will blink in the
LCD Display (#1) to prompt for input.
2. Press the
or
BUTTONS (#9) to select the song to be programmed.
3. Press the PROG. BUTTON (#6) again to store selection. The Program Channel No.
will change to “02” and the track number “00” will blink to prompt for input
4. You may repeat steps 1 - 4 to program as many as 20 tracks.
5. Press PLAY/PAUSE BUTTON (#5) to start the programmed play
6. You may repeat the current programmed track or all programmed tracks by pressing
the MODE BUTTON (#3) once or twice.
7. Press STOP BUTTON (#4) once to stop playback.
8. Press PROG (#6) and then PLAY/PAUSE (#5) to resume programmed play.
9. To cancel programmed play and turn off the CD-60W, press the STOP BUTTON (#4)
again in STOP mode.
