Jensen CD-485, User Manual

Page: 9 / 13

E-8
CD OPERATION
PLEASE READ THIS IMPORTANT INFORMATION:
CD mechanisms used in devices like this are designed to fully read all commercial CDs. They
will also read self-compiled CD-R/CD-RW discs but it may take up to 10 seconds for playback
to start. If playback does not start, it is likely due to the quality of the CD-R/RW disc and/or the
compatibility of the CD compilation software. Manufacturer is not responsible for the playback
quality of CD-R/RW discs.
Do not attach a label or seal to either side of the CD-R/RW disc. It may cause a malfunction.
PLAY MODE
1. Slide the FUNCTION SELECTOR (#23) to the CD/AUX position. The LED DISPLAY (#14)
will light.
2. Open the CD DOOR (#2), load a CD with the label side facing upward and then close the
CD door (#2).
3. The CD will spin and start reading the disc information. When finished, the LED DISPLAY
(#14) will show the total number of tracks on the CD.
4. Press PLAY/PAUSE BUTTON (#7) to start playing the CD; the PLAY/PAUSE
INDICATOR (#15) will light steadily.
5. While playing, press the PLAY/PAUSE BUTTON (#7) to pause playback. The
PLAY/PAUSE INDICATOR (#15) will be flashing on the display. Press the PLAY/PAUSE
BUTTON (#7) again to resume playing.
6. Adjust the VOLUME CONTROL (#10) to the desired volume level.
7. Press STOP
BUTTON (#6) to stop playing.
8. To turn off the CD player, slide the FUNCTION SELECTOR (#23) to POWER OFF position.
NOTE:
If skipping occurs during CD play, try turning the volume down. Do not open the CD
DOOR when a CD is playing.
REPEAT MODE
Repeat 1:
When you first start playing a CD , press the REPEAT BUTTON (#9) once and the REPEAT
INDICATOR (#16) will flash on the LED DISPLAY (#14). The current track playing will now
repeat continuously until you stop playback or change the mode.
Repeat All:
Press the REPEAT BUTTON (#9) again and REPEAT INDICATOR (#16) on the LED DISPLAY
(#14) will light up and stay lit . All tracks on the CD will play in order and will repeat continuously
until you stop playback or change the mode.
To Cancel Repeat Function:
Press the REPEAT BUTTON (#16) again or until the INDICATOR (#16) on the LED DISPLAY
(#14) turn off.