13
Where to place the AL2200ac?
In order for AL2200ac to work optimally it is important the you place it so it can receive good signales
from your exisiting wireless router.
Please avoid placing AL2200ac inside cabinets, behind the TV, inside tv bench etc. or near other
equipment that can generate electro magnetic radiation (TV, speakers, amplifiers etc.)
The speed/performance you get from AL2200ac is very much depending on the quality of the
received signal.
We recommend you to pay attention to the 2.4/5GHz LED when placing AL2200AC.
Please see page 15 for more information about LED status.
Hovedruter (AL5000ac)
tilkoblet internett
Main router connected
to internet.
AL2200AC
Internettmodem
2
1
Internet
3
4
5VDC
ON / OFF Reset/WPS
WiFi
10 seconds
How do I reset AL2200ac to factory default settings?
If you want to setup the AL2200AC for a different network or have any problem with it, you can
reset it back to factory default settings by following this four steps.
1. Plug the AL2200AC into to power outlet and wait 20 seconds.
2. Press and hold the WPS button for 10 seconds.
3. The WPS LED will start flashing when the reset
sequence are enabled.
4. Wait 30 seconds before you switch it off or start
a new setup.
