+
+
-
Cutting the Wall:
Using the appropriate wall-cutting tool, blade or
Stanley knife, accurately cut the hole in the ceiling
Gyprock/Plaster.
Once cut-out complete, remove any insulation from
this area only. Insulation in wall is welcomed but not
in immediate speaker area.
Installing
Speaker Leads:
From your AV Receiver run a speaker cable
thru the wall/ceiling/floor to each Left and
Right speaker.
At cut-out end, leave enough
slack in wire so that it can hang out of hole.
Try to keep Speaker Leads same length –
even if one speaker is closer to AV Receiver.
Use 16 Gauge Speaker lead for runs up to
10 meters. Otherwise 14 gauge for longer.
Important
: Ensure both ends of all Speaker
Lead connect positive to positive (RED to RED)
and negative to negative (BLACK to BLACK).
Using Template (supplied)
Use the supplied template trace
along perforated line.
Ensure your markings are level.
