Advanced Planning is key:
Advance planning in regards to placement of your speakers is critical:
Ensure desired cutout location has available cavity (see above table). If unsure, drill
2mm pilot hole and insert coat hanger wire (or similar) to determine this.
Cutout location must be free of ceiling joists etc. If unsure, Stud Finders are perfect to
determine this. Cutout location must be min. 25mm from a joist/stud for dog-clamp
fixings to swing and clamp rear of gyprock/plaster.
If unsure any handyman, electrician or professional installer can assist here.
D.I.Y In-Wall Installation:
EHT-2, EHT-4, EHT-6, EHT-8
You will need …
EHT-2
100mm
EHT-4
135mm
EHT-6
80mm
EHT-8
95mm
Location:
For Stereo use:
1.2 meters apart is minimum required for Stereo Separation and 1.2 ~
4.0 meters apart is ideal. Tweeter direction is adjustable to allow for compromised and
less than ideal placement.
EHT-8
is the perfect outdoor model due to ample Bass
therefore not requiring Subwoofer.
For Home Theatre use
: Sound array from
EHT-2, EHT-6
and
EHT-8
is downwards
therefore should locate roughly overhead of Listening area.
EHT-4
however, is angled at
40 degrees and sound array is downward AND forward thus creating a wide sound array
and larger sweet spot. Ideal for open plan areas.
Gyprock/ Plaster
cutting tool
(not supplied)
Philips screw driver
(not supplied)
Stud Finder
(not supplied)
Wall cutting Template
(Supplied)
Tip:
These speakers are designed for simple DIY installation. If unsure
any handyman, electrician or professional installer can assist.
Ceiling Cavity needed …
…
