Jenquip EC10, Handbook, Page: 6 / 25

Operating the platemeter
Switching the unit on and off
The platemeter is switched on and off using the
black switch at the back of the unit. Off is in the
‘down’ position. When the unit is off there are no
numbers displayed on the LCD screen.
Rubber Bung
On/off switch
4
EC10
Front display buttons
The functions of the EC10 are defined by the four buttons
on the front of the unit.
The words in BOLD type (see below) are the primary
functions. Activate by pressing the button briefly. Activate
the secondary functions (in normal type, see below) by
holding the button down until the function operates.
Up/Down arrows used to scroll back and forth in some options
When the Count button is pressed the number of readings is displayed.
A “C” will show on the left side and count on the right. Hold the button
down to view menu of further options.
Height displays the average height of readings in clicks (0.5cm).
Pressing Reset will save the average height to memory and reset all data
ready for the next paddock.
Press Display to show the current paddock number selected (1-100)
Press Enter to show the current paddock number selected (1-100)
Height
Reset
Count
Menu
Disp
Enter
Disp/ Enter
Height/ Reset
Count/ Menu
Up/down arrows