Jenoptik JD800i, Instruction Manual

Page: 13 / 26

- 13 -
Automatic power saving function:
1.Under normal operation condition or connecting to the
PC,the camera will be shut off automatically after being
idle for 3 minutes.
Using memory card:
One memory card is enclosed with the camera. You
may purchase more memory cards (SSFDC 2/4/8/16 MB,
3.3 Volt) as you would like to use for the camera at your
own cost. Please contact your nearest dealer for more
information.
When you need to put in, or change the memory card,
please:
(1) Turn off the power
(2) Lift the side cover
(3) Take out the current memory card
(4) Insert the replacement memory card ( Be sure to format if the
card is never used in this camera before.)
(5) Close the card side cover
Important Note:
Format : Insert a new memory card, and press DEL button twice until
*ERASE ALL* is shown in the LCD. Press the shutter release
button, then the memory card is formated
Note : When taking out the memory card, please be sure to turn
off the power to avoid causing damage to the memory card.
Important Note:
Always remember to push the Macro switch back to normal
" " position after use of this mode, or the next pictures
you take for normal shooting will be blurred.