4-2
n
Microwave Combination Wall Ovens
COMPONENT ACCESS
REMOVING THE CONTROL PANEL
Pull oven out of the cabinet approximately 4” to
expose 4 mounting screws (2 on each side). Remove
the screws and pull the control panel and User In-
terface board out. Remove electrical connections.
REMOVING THE MICROWAVE
APPLIANCE MANAGER BOARD
Pull oven out of the cabinet approximately 14”
to expose the top control service cover. Remove
mounting screws and lift service cover up.
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Failure to do so can result in death or
electrical shock.
Replace all parts and panels before operating.
With the Top Control Service Cover removed, the
Microwave service compartment panel is exposed.
Remove the mounting screws from the panel. Lift
the front of the panel and slide the panel toward
the front of the oven and remove it.
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Failure to do so can result in death or
electrical shock.
Replace all parts and panels before operating.
Summary of Contents for JMW2427D
Page 38: ...2 16 n Microwave Combination Wall Ovens OPERATION NOTES...
Page 60: ......
