COMPONENT ACCESS
Four Door Bottom Mount
n
4-15
Accessing Refrigerator Compartment Components (Continued)
Secondary Mullion LED
18.
Insert a putty knife under the LED.
19.
Push in to release the lock and pry up to remove the LED and
disconnect the harness.
Center Divider
20.
Pull forward the center divider and lift out.
21.
To remove the rails on the divider, remove the two screws
holding the divider.
NOTE:
When removing rails on either sides of divider there is
a screw that goes into the rail on other side to help hold it.
Remove this screw also.
22.
Remove rear support by sliding the rail to the left and pulling
the right side out and forward.
23.
Remove side rail assemblies on both sides by lifting up and
pulling forward.
A
A. Center Divider
