Jenn-Air JES9750 Use & Care Manual Download

Page: 16 / 64

When the oven is preheated, the oven will beep, “PREHEAT”
will turn off and “CNVT BAKE” will be displayed. “AUTO” will
be displayed if Auto Convect conversion feature is turned on.

5. Place food in the oven.

6. Press CANCEL when finished cooking.

Convect Roast

(on some models)

Convection Roast can be used to roast meat and poultry, and
vegetables.

To Convect Roast:

Before convection roasting, position racks according to the
“Positioning Racks and Bakeware” section. It is not necessary to
wait for the oven to preheat before putting food in, unless
recommended in the recipe. If a recipe suggest preheating the
oven, add 15 minutes to the cook time.

1. Place food in the oven.

2. Press CONVECT.

3. Use the right Quickset pad to scroll to CNVT ROAST.

4. Select CNVT ROAST using the left Quickset pad.

5. Select the oven temperature using the Quickset pads.

OR
Enter the desired temperature using the number pads.

The temperature can be set between 170°F and 550°F
(77°C and 288°C).

6. Press ENTER pad to set.

7. Select the cook time using the Quickset pads.

OR
Enter the desired cook time using the number pads.

NOTE: If Auto Convect is off, a roast time will not be required.

8. Press ENTER pad to set.

After 3 seconds, the oven will begin to heat. “CNVT ROAST”
will appear in the display along with “100°” or the actual oven
temperature, whichever is higher.

The temperature in the display will increase in 1° increments
until the oven reaches the preset temperature.

Cook time will begin to count down.

9. At 75% of the cooking time the oven will beep to let you know

to check food. Check food using a meat thermometer.

If food is done, take food out of oven and press CANCEL pad
to turn oven off.

If food is not done, continue roasting.

Once the set time has elapsed the oven will automatically go
into Keep Warm

mode for 1 hour and then shut off. If food is

taken from the oven before the hour has elapsed, press the
CANCEL pad.

Convect Pastry

(on some models)

Convect Pastry is designed to bake pastry items such as frozen
pies, turnovers, cream puffs and puff pastry. Use 1, 2 or 3 racks
while using this feature.

1. Press CONVECT.

2. Use the right Quickset pad to scroll to CNVT PASTRY.

3. Select CNVT PASTRY using the left Quickset pad.

4. Select the oven temperature using the Quickset pads.

OR
Enter the desired temperature using the number pads.

The temperature can be set between 195°F and 550°F
(91°C and 288°C) in 5° increments.

5. Press ENTER pad to set.

After 3 seconds, the oven will begin to preheat. “CNVT
PASTRY” and “PREHEAT” will appear in the display along
with “100°” or the actual oven temperature, whichever is
higher. AUTO will display if the Auto Convect conversion
feature is turned on.

The temperature in the display will increase in 1° increments
until the oven reaches the preset temperature. Allow about
15 minutes for the oven to preheat.

When the oven is preheated, the oven will beep, “PREHEAT”
will turn off and “CNVT PASTRY” will be displayed.

6. Press CANCEL when finished cooking.

Rapid Preheat

(on some models)

Use Rapid Preheat to decrease preheating time when using Bake
or Convect Bake. Use for all foods when baking on 1 rack.

For best results, use rack position 2 or 3 when using the Rapid
Preheat option.

For optimum baking and browning results, Rapid Preheat is not
recommended when baking on multiple racks.

To Activate:

After Bake or Convect Bake has been programmed and
activated, press RAPID PREHEAT.

“1 RACK ONLY” will display, after 10 seconds the display will
show “RAPID” and “PREHEAT.”

Preheat time is 5 minutes.

To Return to Standard Preheat: