H
OW TO LEVEL YOUR
REFRIGERATOR
If your refrigerator requires an ice maker
water supply connection, complete
connection instructions on page 8 before
leveling your refrigerator.
To protect personal property or unit
from damage, observe the following:
➢
Protect soft vinyl or other flooring
with cardboard, rugs, or other
protective material.
➢
Do not use power tools when
performing leveling procedure.
MATERIALS NEEDED
➢
3
⁄
8
" hex head driver
➢
Level
1. Remove toe grille and bottom bracket
covers.
2. Turn both front adjustment screws
(A) clockwise to raise and counter-
clockwise to lower.
3. Turn both rear adjustment screws (B)
clockwise to raise and counter-
clockwise to lower.
4. Turn stabilizing legs (C) clockwise
until firmly against floor.
5. Turn front roller adjustment screws
(A) 2 to 3 times counterclockwise, so
that full weight of unit rests on
stabilizing legs (C).
6. Using a level, make sure front of
refrigerator is
1
⁄
4
" (6 mm) or
1
⁄
2
bubble
higher than back of refrigerator. See
leveling step 3 for assistance.
7. Replace toe grille and bracket
cover(s). See markings on inside of
toe grille to insure proper placement.
Snap bottom portion into place
first. Press down on top part of grille
until top portion snaps into place.
A
B
A
C
CAUTION:
9
