Jenn-Air AMC6158B Installation Instructions Manual Download Page 3

3

Installation Instructions

Electrical rating of this oven:

•  120 VAC @ 60 Hz
•  13 A / 1000 W
•  You need a 

DEDICATED

 120 VAC, 60 Hz, 20 A 

(USA) / 15 A (CANADA), fused electrical supply 
(located in the cabinet with the microwave as close 
as possible to the microwave) serving only the 
microwave.

•  Check with a qualified electrician if you are not 

sure whether the oven is properly grounded or if 
you do not completely understand the grounding 
instructions.

•  Do not use a fuse in the neutral or grounding circuit.

WARNING

Improper grounding could result in electric shock
or other personal injury.

•  Save these instructions for the local electrical 

inspectors use.

•  If there is an electrical short circuit, grounding 

reduces the risk of electrical shock by providing an 
escape wire for the electric current. This appliance is 
equipped with a cord having a grounding wire with a 
grounding plug.

•  Place the plug into a properly installed and grounded 

outlet.

• 

Amana does not recommend use of an extension 
cord.

•  Keep the power cord dry and do not pinch or crush 

it.

•  Do not, under any circumstances, remove the power 

supply cord grounding prong!

•  This appliance 

MUST

 be grounded!

������������������
���������������������

�����������
����������������

WARNING

If you do not use the microwave oven as instructed, 
you could be exposed to excessive microwave 
energy.

Do not expose yourself to excessive 
microwave energy!

•  DO NOT try to operate the microwave oven with the 

door open.

•  DO NOT tamper with or defeat the safety interlocks.
•  DO NOT place objects between the microwave oven 

front face and the door.

•  DO NOT allow soil or cleaner residue to build up on 

the flat surfaces around the microwave oven door.

•  DO NOT operate the microwave oven if it is 

damaged.

•  The microwave oven door must close properly to 

operate safely.

•  DO NOT USE THE MICROWAVE OVEN:
•  If the door is bent.
•  If the hinges or latches are broken or loose.
•  If the door seals, sealing surfaces or glass is broken.
•  DO NOT ATTEMPT TO ADJUST OR REPAIR THE 

OVEN YOURSELF!

•  It should be adjusted and repaired by a qualified 

technician who can check for microwave leakage 
after repairing the oven.

WARNING

If you do not mount the oven as instructed, you risk 
personal injury and/or property damage.

WARNING

Before you begin installing the oven, PLACE A 
PIECE OF THE CARTON OR OTHER HEAVY 
MATERIAL (a blanket) over the countertop or 
cooktop to protect it. Do not use a plastic cover. 
Failure to protect these surfaces could result in 
property damage.

Summary of Contents for AMC6158B

















Reviews: