Jenn-Air 720-0150-LP Instructions Manual Download Page 12 | Manualshive

Page: 12 / 27

background image

If the flames have yellow tips, loosen the locking
nut and move the bolt in a clockwise direction.

WARNING

Burner adjustments should only be performed
after the burners have cooled.

Always tighten the locking nut before relighting
the burner.

Locking Nut

If the flames are making excessive noise or
lifting, loosen the locking nut and turn the bolt in
a counter-clockwise direction.

Remember to tighten the locking nut before
relighting the burner. If you have any questions
regarding flame stability, please contact
customer service at 1-800-554-5799.

Adjustment Bolt

1.

Specified clearance maintained 24 in. from
combustible materials/construction.

2.

All internal packaging has been removed.

3.

The hose and regulator are properly
connected.

INSTALLER FINAL CHECK

4.

The unit has been tested and is free of leaks.

5.

The gas supply shut off valve has been
located.

6.

All burners are factory installed.

WARNING

1.  Do not store spare LP gas cylinders under or near this appliance.

2.  Never fill the cylinder beyond 80 percent capacity.

3.  If the information above is not followed exactly, a fire resulting in death or serious injury could occur.

10

«
...
10
11
12
13
14
...
»

Summary of Contents for 720-0150-LP




























Reviews:

No comments

Related manuals for 720-0150-LP

Brand: Dacor Pages: 4

Brand: Gastroback Pages: 60

Brand: Superior Pages: 10

Brand: Jata electro Pages: 12

Brand: Jepson Pages: 12

Brand: Barbecook Pages: 122

Brand: Carlyle Tools Pages: 16

Brand: EINHELL Pages: 10

Genesis 1500 NG

Brand: Weber Pages: 36

Brand: Davis & Waddell Pages: 8

Brand: Mayer Barbecue Pages: 8

Brand: MaxPro PROFESSIONAL Pages: 82

Brand: Broil King Pages: 32

Brand: Monument Grills Pages: 21

Brand: Klarstein Pages: 36

Brand: Klarstein Pages: 37

Brand: KitchenAid Pages: 94

Brand: KitchenAid Pages: 90

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands