4
INSTALLATION INSTRUCTIONS
Tools and Parts
TOOLS NEEDED:
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
PARTS NEEDED:
Custom Overlay Door Panel—See “Overlay Panel—Rear View.”
Hardware (Optional)
PARTS SUPPLIED:
Custom Overlay Panel
If you plan to install a custom overlay panel, you will need to
create the panel yourself or consult a qualified cabinetmaker or
carpenter. See dimension drawings for panel specifications.
IMPORTANT:
■
The thickness of the wood overlay must be
³⁄₄
" (1.91 cm).
■
Overlay panel must not weigh more than 20 lbs (9.07 kg).
■
Overlay panel weighing more than recommended may
cause damage to your refrigerator.
Overlay Panel—Rear View
Create the custom overlay panel using the dimensions shown.
Install Overlay Hooks
Using a Phillips screwdriver and eight flat-head screws attach the
overlay hooks to the back of the overlay panel. See “Overlay
Panel–Rear View,” for overlay hook locations.
Door Hinge Holes
■
The views of the top and bottom hinge pin hole show a right-
hand hinge. Mirror the image for a left-hand hinge.
■
We recommend using a C-clamp and two pieces of scrap
wood (front and back) to help reinforce the overlay panel when
drilling the hinge pin holes.
1. Using a
¹⁄₂
" Brad point doweling drill bit, drill a
¹⁄₂
" (1.27 cm)
deep hole into the top of the overlay panel for the top hinge
pin as shown.
Top View
■
Hand drill or electric drill
(properly grounded)
■
¹⁄₂
" Brad point doweling
drill bit
■
Phillips screwdriver
■
Scissors
■
Masking tape
■
Tape measure
■
Petroleum jelly
■
Flat-head screws (8)
■
Round-head screws (8)
■
Overlay plates (2)
■
Overlay hooks (4)
A. Overlay hook locations
A
23
³⁄₄
"
(60.33 cm)
1
⁵⁄₁₆
"
(3.33 cm)
1
⁵⁄₁₆
"
(3.33 cm)
4
¹³⁄₃₂
"
(11.2 cm)
2
¹⁄₂
"
(6.4 cm)
29
⁷⁄₈
"
(75.88 cm)
A. Overlay hooks (4)
A. Radius 5.0
A
¹⁄₂
"
(1.2 cm)
¹⁷⁄₃₂
"
(1.35 mm)
A
Back Surface
Front Surface
