manualshive.com logo in svg

JENCO 6219, Operation Manual

Share
Download
JENCO 6219 Operation Manual Download Page 21

 

20 

RETURN OF ITEMS 

   
Authorization must be obtained from one of our representatives before 
returning items for any reason. When applying for authorization, please 
have the model and serial number handy, including data regarding the 
reason for return. For your protection, items must be carefully packed to 
prevent damage in shipment and insured against possible damage or loss. 
Jenco will not be responsible for damage resulting from careless or 
insufficient packing. A fee will be charged on all unauthorized returns. 
 

NOTE:

 Jenco Instruments, Inc reserves the right to make improvements in 

design, construction, and appearance of our products without notice. 
 
 
 
 
 

JENCO INSTRUMENTS, INC.

 

7968 Arjons Drive, Suite C 
San Diego, CA 92126 USA 
TEL:001-858-5782828  FAX:001- 858-5782886  
E-MAIL: 

[email protected]

 

Homepage:http://www.jencoi.com 
 

JENCO ELECTRONICS, LTD.

 

PO. BOX LINKOU 117 
TAIPEI, TAIWAN 
TEL: (886-2)2601-6191   FAX: (886-2)2601-7206  
E-MAIL: [email protected] 
 

SHANGHAI JENCO ELECTRONICS, LTD. 

18 Wang Dong Zhong Road 

Sijing Town,Songjiang 

SHANGHAI,CHINA

 

TEL: (86-021)5761-9599  FAX: (86-021)5761-9598 

E-MAIL: 

[email protected]

 

Homepage:http://www.jenco.com.cn 

Summary of Contents for 6219






















Reviews:

No comments

Brands by name

Popular brands

Load more brands