3
INSTALLING THE BATTERIES
To insert the batteries into the meter, follow the procedure outlined
below.
1.
Use a Philip screw driver and unlock the battery cover by
turning the screw driver in the counter clockwise direction.
After unlocking the screw, take off the battery cover (Fig.1)
2.
Replace the old batteries with new ones and install them in the
correct polarity position.
3.
Put the battery cover back on the instrument. Use a Philip
screw driver and turn the screw in the clockwise direction to
lock the battery cover.
Figure 1: Battery compartment
CONNECTOR
1
2
3
Figure 2: Connector
