3
INSTALLING THE BATTERIES
The 6011M/6011EU meter is packaged with one 9 V battery
required for operation. To insert the batteries into the meter, follow
the procedure outlined below.
Figure 1: Battery compartment
1. Use a screw driver to remove the four screws and battery cover
to expose the battery compartment. (Figure 1.)
2. Replace the 9 V battery.
3. Replace the battery cover and make sure to secure the four
screws for the water-tight feature.
CONNECTOR
Figure 2: 6011M Connector
1. pH/ORP connector (BNC connector)
2. ATC connector (6 PIN Waterproof connector)
