![JENCO 6010M Manual Download Page 17](http://html.mh-extra.com/html/jenco/6010m/6010m_manual_641900017.webp)
16
GENERAL INTRODUCTION
Thank you for selecting the 6010M meter. The 6010M is a precision
tool that measure pH, ORP and temperature. A built-in
microprocessor stores, calculates and compensates for all
parameters related to pH determinations including pH electrode
temperature characteristics, electrode slope deviations and buffer
solutions.
This unit has a waterproof IP65 case. The touch mode keys are
highly reliable with tactile and audio feedback. This meter can
operate with one 9V battery, typical battery life is 1000 hours.
Re-calibration is not required when power is turned on again.
The front of the meter has a large LCD that displays pH or ORP and
temperature simultaneously along with user prompts and mode
indicators. The unit prompts the user through calibration and
measurement procedures.
An AUTOLOCK feature for both pH and ORP measurements
enables the unit to automatically sense the end point and “ HOLD ”
the display to indicate the end point value of a measurement.
AUTOLOCK and user prompts help to eliminate most errors in
determining pH and mV values, resulting in precise, repeatable and
error-free measurements. The 6010M can also be used in
non-AUTOLOCK mode.
The unit is also equipped with a non-volatile memory allowing the
user to store 50 different sets of readings. This unit will assign a site
number for each set of reading so the user can review the data
easily.
The model 6010M is available with pH, ORP and ATC (Automatic
Temperature Compensation) probes. Other features include
electrode offset recognition, electrode slope recognition, electrode
efficiency display, built-in buffer coefficients, automatic or manual
temperature compensation, long battery life and 50/60Hz AC noise
rejection. This meter is user-friendly for field, industrial and
laboratory applications.
INITIAL INSPECTION
Carefully unpack the unit and accessories. Inspect for damages
made in shipment. If any damage is found, notify your
Jenco
representative immediately. All packing materials should be saved
until satisfactory operation is confirmed.