Assembly instruction
Status: 12.05.2022
Mercedes Sprinter Integrated
W907 /W910, Cab system
Jehnert Sound Design I Im Michelreis 14 I 72124 Pliezhausen I Tel.: 07127-93457-0 I [email protected] I www.jehnert.de
Art.- No. 65130
•
Clip the tweeter cover strips back in place and tighten the screw on the outside (see Fig. H).
•
Mount original HT cover (see Fig. I)
•
Place the mid-high module on the discard tray and connect the tweeter and mid-range drivers
so that they are short-circuit-proof (see Fig. J).
G
1.3. mounting of the mid-high modules in the dashboard
(only suitable for vehicles with storage compartment without cover fl ap)
H
I
•
When the cables have been properly routed through the hole (no excessive tension) insert both screws of the cupholder storage
compartment and tighten them (see fi g. F/G)
F
J
