Assembly instruction
Status: 12.05.2022
Mercedes Sprinter Integrated
W907 /W910, Cab system
Jehnert Sound Design I Im Michelreis 14 I 72124 Pliezhausen I Tel.: 07127-93457-0 I [email protected] I www.jehnert.de
Art.- No. 65130
Recommendation:
To achieve the full sound performance of the sound system, we recommend Sound Package I, which signifi -
cantly increases the sound performance of the system with the additional amplifi er and subwoofer.
3-way sound system Mercedes Sprinter (65130)
Mounting kit part no. 65130:
10x self-tapping screw with collar 3.9 x 16
2x Spax screw 4x25
2x Spax screw 4x55
2x plastic ring washer
Required tools
Phillips screwdriver
Torx screwdriver (TX 20/25/30)
Hot glue gun
Plastic wedge
Insulating tape
Stripper
Crimping pliers
Side cutter
Model/year: Sprinter VS30 from 2018 (Type W907 / W910) - Integrated models incl. low-frequency extension.
Only for vehicles without cover fl aps on the dashboard/storage compartment
Packing List:
1x midrange/tweeter module incl. acoustic fabric baffl e (left & right), covered.
2x „XE26“ neodymium softdome tweeter Ø 26mm
2x „XE80“ midrange driver Ø 80mm
2x „XE130G“ low-midrange driver „Power-Woofer“ Ø 130mm
2x mounting ring and grille for „XE130G
2x mid-high crossover incl. cable assembly (Art.-No.: 7000 FW)
2x low frequency crossover incl. cable assembly and rear felt (Art.-No.: 65130FW-TT)
1x mounting set - Mercedes Sprinter art.-no.: 65130)
1x 5-channel DSP amplifi er incl. 2,2m ISO cable and mounting instructions
1x subwoofer of your choice incl. mounting set and 4,8m subwoofer cable
1x cable crossover for center crossover speaker jacketed
with sound package 2 (68132):
2x living room speakers of your choice incl. mounting set and
mounting instructions
