Assembly instruction
Status: 03.05.2022
Mercedes E-Class
W124 Doorboard
Art. No. 75170
Jehnert Sound Design I Im Michelreis 14 I 72124 Pliezhausen I phone: 07127-93457-0 I [email protected] I www.jehnert.de
7 . Panel mounting on the vehicle door
Fixed point lines for adjustment:
7.1 Place the panel without loudspeaker and cover on the mounted door panel and align it:
Fixed point line 1: Adjust the upper edge of the panel directly under the armrest.
Fixed point line 2: Insert the „nose“ on the upper edge of the panel exactly into the opening above
the front edge of the original card pocket.
Fixed point line 3: The lower edge of the panel and the lower edge of the door trim are fl ush.
7.2 Screw the supplied Spax and sheet metal screws directly through the panel and door trim into
the inner door panel.
Caution: When screwing in the screws, make sure that no cables, electrical or mechanical parts in
the vehicle door are damaged, electrical or mechanical parts in the vehicle door are damaged.
Secure the door panel with the door trim by screwing it in lightly.
Check fi t once again and tighten screws carefully.
Only the exact adaptation of the panel to the door trim
ensures an optimal fi t
All cut edges of the panel must be in contact with the door
trim all around without any gap.
M4x 45
small washer -> TV
M4x 70
small washer
B
M4x 70
M4x 45
small washer
3,9 x19
Lens head
B
=predrill
+ large M4
B
B
Fixed point line 3
Fixed point line 2
Fixed point line 1
Slide the „nose“ on the panel directly into
the opening in the door panel
The panel runs
below the armrest
Lower edge of door trim and
Panel lower edge close fl ush
