Assembly instruction
Status: 07.02.2023
Fiat Ducato III + Serie 8,
CampTec Style
Basic Installer Paket, 2-Ways
Jehnert Sound Design I Im Michelreis 14 I 72124 Pliezhausen I Tel.: 07127-93457-0 I [email protected] I www.jehnert.de
Art. No. 68501
C
D
A
B
E
F
A:
Loosen 2 plastic screws on each side at the top of the REMIS roller blind frame. Disassemble/assemble the driver‘s
and co-driver‘s one after the other so that the roller blind is always fi xed on one side.
B:
Loosen the door sealing rubber in the area of the A-pillar.
2. mounting tweeter
(in original installation opening in Remis blackout blind)
C:
Carefully remove A-pillar trim, place on dashboard (->protect surface with adhesive tape if necessary)
and unclip and unplug existing original tweeter
D:
Connect JEHNERT tweeter, clip it into the holder and turn it in the holder until it clicks into place.
E:
Push connector into foam hose
F:
Push foam hose into gap between dashboard and A-pillar.
Reassemble trim parts and door seal in reverse order -> For A-pillar trim ensure correct position of clips and cables
(without illustration)
