9.1. Precisely align and carefully press grill into the Velcro fasteners.
The Velcro fastener makes a crackling sound
when it is closed correctly.
9.1. Precisely align and carefully press grill into the Velcro fasteners.
The Velcro fastener makes a crackling sound
when it is closed correctly.
Removing the grills:
The Velcro fasteners stick together very strongly!
The grills can be removed anytime by carefully lifting them off.
Please, avoid any way of forceful yanking at the grills.
It could break!
9.3.
9.2.
Our Tip:
If the panel cannot be pressed on completely at some points. . .
Cause:
the special form at these points and the resulting differences in
material cross section of the grill.
Solution:
the distance can be levelled out with spacers 3 under the
Velcro disc.
(Spacers included with the screw kit)
1.
roll down window completely.
2.
carefully push the switch of the rear-view mirror (driver’s side) and the grill on
the door handle (co-passenger’s side) out of the catch.
Remove the screw underneath and disconnect the cables.
3.
for door-airbags: push off the airbag grill (B).
Unscrew cross head screw underneath
4.
remove the plastic frame round the door latch lever (C) to the door hinge
and take it away
5.
carefully remove the plastic clips on the door-lining edges and move the
door-lining forward away from the inner door metal
IMPORTANT:
Please, avoid any way of forceful yanking at the door lining.
It could break!
A =
switch for rear mirror
(driver’s side)
6. remove the Bowden pull wire of the door latch lever
7. disconnect the original loudspeaker plugs of the tweeter.
B =
airbag grill
C =
door latch lever
75149 - BMW Z 3
- 3 -
© JEHNERT SOUND DESIGN
75149 - BMW Z 3
- 12 -
© JEHNERT SOUND DESIGN
1 . Disassembly of the door lining
A
B
C
�
�
9. Installation of the speaker’s grill :
grill
2 self-adhesive Velcro-strip
1 Velcro fastener
3 Washer M4 ø 20 as spacer
doorpanel
Remove the Torx-screw underneath and disconnect the cables.
Unscrew Torx-screw underneath.
46149 - BMW Z3