Read Before Installation
Operation
Thank you for your purchase of this JEGS 6-Ton
Shop Press.
Before assembly, please be sure to verify that all of
the components have been received. Reference the
parts list on the previous page. If any components
are missing or damaged please contact customer
service at: 1.800.345.4545.
The assembly of this shop press can be done with
basic hand tools. If you are having issues, or have
questions regarding the assembly of this press,
please contact our technical support department
at: 1.800.345.4545.
Return Information:
Before modifying any of the
parts of this press, please trial fit all components.
Modified parts will not be accepted for return.
1. Place piece on press bed.
2. Locate and close release valve by turning it clock-
wise until tight.
3. Pump handle until the ram is near the work piece.
4. Align ram to work piece as needed.
5. Pump handle to apply load to work piece.
Do not overload.
6. Release pressure by turning the release valve
counterclockwise. Make sure your work piece
is secure to prevent injury or damage.
7. Remove work piece from press bed.
2
Specifications
Capacity
6-Tons
Working Range
0-230 mm
Width
320 mm
Features
1. Used for parts straightening, bending
and pressing
2. Multi-position bed for work height adjustment
Warning
1. Read the entire instruction manual before use.
2. This press is intended for use by trained
personnel. Do not use if you are not familiar with
the proper operation of a hydraulic press.
3. Do not operate this press beyond its rated
weight capacity.
4. Intended uses for this press include bending,
pressing, and straightening.
5. Do not compress springs or other objects that
could be ejected, or shatter.
Continued Onto Next Page
