4. Turn release valve clockwise to the closed position.
5. Jack is now ready for use. Check for proper pump action.
BEFORE USE
1. Before using this product, read the owner's manual completely and familiarize yourself thoroughly with the product
and the hazards associated with its improper use.
2. Perform the air purge procedure. (See previous instructions for system purge procedure.)
3. Pour a teaspoon of good quality, air tool lubricant into the air supply inlet of the lift control valve. (See illustration)
Connect to air supply and operate for 3 seconds to evenly distribute lubricant.
4. Check and that the pump operates smoothly before putting into service.
5. This product uses a standard 1/4" NPT air fitting. If changing of the fitting is required, install a 1/4" NPT fitting of your
choice; ensure that thread tape or compound is used to seal connection.
6. Inspect before each use. Do not use if bent, broken or cracked components are noted.
1-800-345-4545 jegs.com
