8
USER MANUAL v2.1
JEFGENPET30EL
3.8kVA Petrol Generator - Key Start
www.jeffersontools.com
STOPPING THE GENERATOR
1.
Before stopping the generator, allow it to run for approximately
3 minutes
with no consumers so that it can "cool
down".
2.
Turn off the circuit breaker.
3.
Turn the key/ignition switch to the "
OFF
" position.
4
. Turn the fuel cock lever to the "
CLOSED
" position.
TRANSPORTATION AND STORAGE
• When transporting the generator, ensure the starting switch is set to the "
OFF
" position and that the fuel valve is
set to the "
CLOSED
" position.
• Keep the generator level to prevent fuel spillage. Fuel vapour or spilled fuel may ignite. Touching a hot engine can
cause serious burns or fires.
• Let the engine cool before transporting or storing the generator.
• Make sure not to drop or strike the generator when transporting. Do not place heavy objects on top of the
generator during transit, storage or operation.
OPERATING ENVIRONMENT
This unit can generate rated output under the following conditions:
Altitude
Ambient Temperature
Relative Humidty
0m
+20º
60%
The Generator should work in low output under the following conditions:
Altitude
Ambient Temperature
Relative Humidty
>1000m
>40
º
90%
