11
USER MANUAL v2.1
JEFWASPET065HP-A
6.5HP Petrol Pressure Washer
www.jeffersontools.com
USING THE SRAY GUN
1.
To engage the Trigger Lock, pull the lock up until it clicks into the slot.
2.
To disengage the Trigger Lock push the lock down and into its original position.
To operate the trigger:
Squeeze the trigger to start the water flow through the nozzle.
Release the trigger to stop the water flow.
WASHING & CLEANING
1.
Grip the spray gun with both hands.
2.
Point the nozzle in a safe direction and squeeze the spray gun trigger to
allow the pump to purge air and impurities in the system and then redirect
the nozzle to the working surface.
3.
When finished release the trigger gun to stop the water flow.
Important:
For most effective cleaning keep the spray nozzle
approximately 8 to 24 inches away from the cleaning surface.
When cleaning tyres do not bring the nozzle within 6 inches of the surface
to avoid damage and potential injury.
PRESSURE ADJUSTMENT
1. Vary the Cleaning Distance.
One method of adjust the pressure on the cleaning surface is to vary the
distance between the nozzle and the object you are cleaning.
2. Change the pressure nozzle.
Completely shut down the pressure washer and stop
the petrol engine. Change the spray nozzle as required
for the cleaning application.
3. Adjust the pump pressure regulator.
The pump pressure regulator allows pressure adjustment at the pump.
Turn the pressure regulator knob on the pressure pump counterclockwise /
clockwise to increase and decrease.
Summary of Contents for JEFWASPET065HP/A
Page 1: ...OLYMPUS User Manual v 2 1 JEFWASPET065HP A DIRECT DRIVE PUMP PETROL PRESSURE WASHER...
Page 2: ......
Page 34: ......
Page 35: ......
