www.jeffersontools.com
User Manual
v.1.1
JEFLADTEL13S
5. FITTING THE STABILIZER BAR
1.
Flip the Telescopic Ladder vertically
so that the feet are accessible. You will
notice plastic pins in the slot on each
foot. In order to fit the Stabilizer Bar
these pins will need to be snapped. This
can be done easily using a flathead
screwdriver.
2.
Once the pins have been snapped and
removed, the Stabilizer Bar will fit into the slots.
You will need to line up the holes on the
Stabilizer Bar with the holes on the legs of the
Telescopic Ladder.
NOTE:
You may need a rubber mallet to
carefully tap the Stabilizer Bar into the slots
securely.
3.
With the Stabilizer Bar slotted
onto the feet of the ladder, secure
into place using the 2 bolts provided.
Tighten the bolts with a wrench to
secure.
