USER MANUAL
JEFFANORFL18-230
18
"
ORBITAL FLOOR FAN
•
230V
~
50Hz
www.jeffersontools.com
5
OPERATION
Please ensure that you read, understand and apply safety instructions in
before attempting to use this equipment.
The fan can be floor mounted on a suitable flat level surface or wall
mounted as shown below.
1.
Check that the speed control is set to “
0
” (
OFF
) and then plug into the
mains power supply and switch the power on.
2.
Adjust the direction of the air flow by moving from side to side and tilting
the fan grill up or down, as required as shown in
Fig. 2 .
3.
The fan is equipped with 3 speed settings: (
"1" = Low "2" = Medium
"3" = High
) to control the rate of air flow delivered.
Select the speed you require using the knob on the control box.
4.
When you have finished using the fan ensure you turn the speed control
switch back to "
0
” (
OFF
) and disconnect the fan from the mains
power.
WALL MOUNTING
You can mount the fan on a suitable wall surface using the fixings supplied:
1. Fix the bracket to the wall at a suitable height and screw firmly into place (
Fig. 3)
.
2. Carefully mount the fan onto the bracket (
Fig. 4)
.
3. and secure using the screw supplied. (
Fig. 5)
Please Note:
the fan should only be mounted on a qall that can support
the equipment (solid woof, brick concrete etc).
Do not mount on plaster board dry wall or other weak or brittle
surfaces .
Fig.2
Fig.3
Fig.4
Fig.5
