Warning:
Please read all safety instructions carefully before use to avoid the risk of accident or personal injury.
!
JEFBGSSTDADJ
Adjustable Bench Grinder
Pedestal Stand
1.
1. Introduction
This equipment is designed for general workshop use and is designed to accommodate most bench
grinders with 2 or 4 bolt mountings. It is manufactured from heavy duty, cast iron to ensure the best stability for the
mounted bench grinder. The stand is designed to be anchored the floor with fixing bolts.
Please read and follow the instructions carefully. In doing so you will ensure the safety of yourself and others around
you, and you can look forward to the product giving you long and satisfactory service.
Please keep these instructions in a safe place for future reference
1.
Slide the lower column into the base and secure with the two M10 x 10 setscrews.
2.
Slide the storage shelf over the lower column, and secure with the two hex head bolts & flat washers.
Fit the two wheel storage boxes to the storage shelf using the self-tapping screws.
3.
Screw in the tensioning knob and the upper column stop screw with spring washer, into their holes in the lower
column.
4.
Locate the grinder mounting table onto the upper column, securing with the four socket head screws provided.
5.
Screw the cable retaining hook to the table from underneath using the small screw & flat washer
6.
Slide the upper column down into the lower column and set in your chosen position by twisting it, so that the stop
screw engages into one of the positioning slots. Fasten securely with the tightening knob.
Warning:
Do not fit the bench grinder to the stand until the stand is bolted to the floor. The stand is not designed to be
free-standing and the base must be secured to the floor prior
To mounting the grinder.
2. Assembly
