USER GUIDE
v1.2
20W Telescopic LED Worklight 110V - 1400 Lumens
JEFWLT20WTEL-110
Specifications
Assembly
1.
Attach the lamp head to the bracket by threading a washer on each of the angle fixing bolts.
2.
Insert the bolts through the holes on each side of the bracket then into the side holes
located on the lamp head brackets.
3.
Hand tighten the bolts until fixed firmly.
4.
Attach the lamp head assembly to the stand and thread the remaining bolt through the
threaded hole in the stand and tighten up by hand until fixed firmly.
•
Do not submerge this equipment in liquids
•
Avoid pointing the light source directly at the eyes
•
Check equipment for wear or damage before use
•
Do not modify the equipment or use for purposes other than those it was designed
•
Store in a cool dry environment, keep away from children
Handling & Storage
110V
20W / 30mil Epistar LED Chip
1400 Lumens
6500k
5M / 16A Plug
IP65
Voltage:
Input Power / Chip:
Luminosity:
Colour Temperature:
Cable / Plug:
Ingress Protection (Housing):
