Jeep WRANGLER 2021 Page 410 Owner'S Manual Download

Page: 410 / 464

408

SERVICING AND MAINTENANCE

Tire Loading And Tire Pressure

NOTE:

The proper cold tire inflation pressure is listed

on the driver’s side B-pillar or the rear edge of

the driver's side door.
Check the inflation pressure of each tire,

including the spare tire (if equipped), at least

monthly and inflate to the recommended

pressure for your vehicle.

Example Tire Placard Location (Door)

Example Tire Placard Location (B-pillar)

Tire And Loading Information Placard

This placard tells you important information

about the:
1. Number of people that can be carried in

the vehicle.

2. Total weight your vehicle can carry.

3. Tire size designed for your vehicle.
4. Cold tire inflation pressures for the front,

rear, and spare tires.

The vehicle maximum load on the tire must not

exceed the load carrying capacity of the tire on

your vehicle. You will not exceed the tire's load

carrying capacity if you adhere to the loading

conditions, tire size, and cold tire inflation

pressures specified on the Tire and Loading

Information placard

page 192.

NOTE:

Under a maximum loaded vehicle condition,

gross axle weight ratings (GAWRs) for the front

and rear axles must not be exceeded.

For further information on GAWRs, vehicle

loading, and trailer towing

page 192.

To determine the maximum loading conditions

of your vehicle, locate the statement “The

combined weight of occupants and cargo

should never exceed XXX kg or XXX lbs” on the

Tire and Loading Information placard. The

combined weight of occupants, cargo/luggage

and trailer tongue weight (if applicable) should

never exceed the weight referenced here.

21_JL_OM_EN_USC_t.book Page 408

Summary of Contents for WRANGLER 2021

















































































































































































































































































































































































































































































Search results

Summary of Contents for WRANGLER 2021

Reviews:

Related manuals for WRANGLER 2021

Brands by name

Popular brands

Jeep WRANGLER 2021, Owner'S Manual

Search results

Summary of Contents for WRANGLER 2021

Reviews:

Related manuals for WRANGLER 2021

Brands by name

Popular brands