Jacking And Tire Changing
The jack and lug wrench are located in the rear
storage compartment.
For further information and applicable warn-
ings and cautions, please refer to your Owner’s
Manual at www.jeep.com/en/owners/manuals.
Four–Wheel Drive Operation
(Command-Trac I Or Rock-Trac)
The transfer case provides four mode positions:
•
2H (Two-Wheel Drive High Range):
This range
is used for normal street and highway driving
on hard-surfaced roads.
•
4H (Four-Wheel Drive High Range):
This range
locks the front and rear driveshafts together,
forcing the front and rear wheels to rotate at
the same speed. This range (4H) provides
additional traction for loose, slippery road
surfaces, and should not be used on dry
pavement.
•
N (Neutral):
This range disengages the front
and rear driveshafts from the powertrain.
It is to be used for flat towing behind another
vehicle.
•
4L (Four-Wheel Drive Low Range):
This range
locks the front and rear driveshafts together,
forcing the front and rear wheels to rotate at
the same speed. This range (4L) provides
additional traction and maximum pulling
power for loose, slippery road surfaces only.
Do not exceed 25 mph (40 km/h).
Jack And Lug Wrench Location
Four-Wheel Drive Gear Selector
JACKING AND TIRE CHANGING
STARTING AND OPERATING
