Symptom:
PEDAL SENSOR SHORTED TO GROUND
When Monitored and Set Condition:
PEDAL SENSOR SHORTED TO GROUND
When Monitored:
Constantly
Set Condition:
When the APM detects a ground condition at the Sense circuit.
POSSIBLE CAUSES
MOTOR/SENSOR ASSEMBLY SHORTED TO GROUND
APM-SENSE CIRCUIT GROUNDED
INTERMITTENT DTC
TEST
ACTION
APPLICABILITY
1
With the DRBIII
t
, erase DTC’s.
With the DRBIII
t
, read DTC’s.
Does the DRBIII
t
display PEDAL SENSOR SHORTED TO GROUND DTC active?
All
Yes
→
No
→
2
Disconnect the Adjustable Pedals Motor/Sensor harness connector.
Turn the ignition on.
With the DRBIII
t
, read the active DTCs.
Does the DRBIII
t
display SENSOR WIRING SHORTED TO GROUND?
All
Yes
→
Inspect for and correct wiring damage. If no damage is found,
replace and program the Adjustable Pedals Module in accordance
with the Service Information..
Perform ADJUSTABLE PEDALS VERIFICATION TEST - VER
1.
No
→
Repair any Motor/Sensor assembly wiring concerns. If no wring
concerns are found, replace the Adjustable Pedals Motor/Sensor
assembly.
Perform ADJUSTABLE PEDALS VERIFICATION TEST - VER
1.
3
Turn the ignition off.
Visually inspect the related wiring harness. Look for any chafed, pierced, pinched, or
partially broken wires.
Visually inspect the related wire harness connectors. Look for broken, bent, pushed
out, or corroded terminals.
Refer to any Hotline letters or Technical Service Bulletins that may apply.
Were any problems found?
All
Yes
→
Repair as necessary.
Perform ADJUSTABLE PEDALS VERIFICATION TEST - VER
1.
No
→
Test Complete.
12
ADJUSTABLE PEDALS
