manualshive.com logo in svg

Jeep Renegade Latitude 2019, User Manual, Page: 53 / 308

Share
Download
Jeep Renegade Latitude 2019 User Manual Download Page 53

INTERNAL EQUIPMENT

Power Outlet

The 12 Volt (13 Amp) power outlet is located
under the HVAC controls in front of the gear
selector. The power outlet can power mobile
phones, electronics and other low power de-
vices.

NOTE:

• Do not exceed the maximum power of

160 Watts (13 Amps) at 12 Volts. If the
160 Watt (13 Amp) power rating is ex-
ceeded, the fuse protecting the system will
need to be replaced.

• Power outlets are designed for accessory

plugs only. Do not insert any other object in
the power outlet as this will damage the
outlet and blow the fuse. Improper use of
the power outlet can cause damage not
covered by your new vehicle warranty.

Power Inverter — If Equipped

There is a 115 Volt, 150 Watt power inverter
outlet located on the back of the center
console. This outlet can power cellular
phones, electronics and other low power de-
vices requiring power up to 150 Watts.
• To turn on the power outlet, simply plug in

the device. The outlet automatically turns
off when the device is unplugged.

Front Power Outlet

Body Computer Fuses

F94 Fuse 15A Blue Instrument Panel

Power Outlet

Power Inverter

51

Summary of Contents for Renegade Latitude 2019





















































































































































































































































































































Reviews:

No comments